NOTE: These settings are temporary. After you have finished the job, the product returns to the
default settings.
Edge-to-edge copying
Use this feature to avoid shadows that can appear along the edges of copies when the original
document is printed close to the edges.
1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. Open the following menus:
●
Copy Settings
●
Edge-To-Edge
3. Select the Edge-To-Edge output option if the original document is printed close to the paper edges.
4. Touch the OK button.
Clean the pickup rollers and separation pad in the document
feeder
1. Lift the document-feeder latch.
ENWW
Improve copy quality
235
To Next Page
Loading...
