Connect the product to a computer by using a USB
cable and install the software (Mac)
This product supports a USB 2.0 connection. Use an A-to-B type USB cable. HP recommends using a
cable that is no longer than 2 m (6.5 ft).
1. Connect the USB cable to the product and the computer.
2. Install the software from the CD.
3. Click the product icon, and follow the on-screen instructions.
4. Click the Close button.
5. Print a page from any program to make sure that the software is correctly installed.
ENWW
Connect the product to a computer by using a USB cable and install the software (Mac)
15
To Next Page
Loading...
