HP M525

Tray 1
Tray capacity and paper orientation
To prevent jams, do not overfill trays. Be sure the top of the stack is below the tray-full indicator. For
short/narrow and heavy/glossy paper, load paper to less than half of the tray full indicators.
Table 3-3 Tray 1 capacity
Paper type Specifications Quantity
Paper Range:
60 g/m
2
(16 lb) to 220 g/m
2
(58 lb)
Maximum stack height: 12 mm (0.5 in)
Equivalent to 100 sheets of 75 g/m
2
(20 lb)
Envelopes
75 g/m
2
(20 lb) to 90 g/m
2
(24 lb)
Up to 10 envelopes
Labels 0.10 to 0.14 mm (0.004 to 0.006 in) thick Maximum stack height: 12 mm (0.5 in)
Transparencies 0.10 to 0.14 mm (0.004 to 0.006 in) thick Maximum stack height: 12 mm (0.5 in)
Table 3-4 Tray 1 paper orientation
Single-sided printing Automatic duplex printing and
Alternative Letterhead Mode
Envelopes
Face-up
Top edge leading into the product
Face-down
Bottom edge leading into the product
Face-up
Short, postage end leading into the product
26 Chapter 3 Input trays and output bins ENWW