Service menu
The personal identification number (PIN; Service Access Code) used to access the Service menu is 11075013.
In the following table, asterisks (*) indicate the factory default setting.
First level Second level Third level Values
User Access Code
Administrator Access Code
Service Access Code Print Event Log
View Event Log
Clear Event Log
Cycle Counts Total Engine Cycles
Mono Cycle Counts
0*
Range: 0 – 9999999
Color Cycle Count 0*
Range: 0 – 9999999
Refurbish Cycle Count 0*
Range: 0 – 9999999
Serial Number
Service ID 20182*
Cold Reset Paper Letter*
A4
New Registration Roller Yes
No*
Low Alerts Enable
Disabled
Rest Low Alerts Settings Reset to level 1
Reset to level 2
Reset to level 3
Set to non-HP managed mode
Media Sensor Value 0*
Range: 0 – 4095
Manual Laser Glass Cleaning
Test Support Continuous Print from USB
Automatic Calibrations Disabled
Enabled*
ENWW Menu map 267
To Next Page
Loading...