HP M750 series

Configuration page
Depending on the model, up to three pages print when you print a configuration page. In addition to the main
configuration page, the embedded Jetdirect configuration pages print.
Configuration page
Use the configuration page to view current product settings, to help troubleshoot product problems, or to
verify installation of optional accessories, such as memory (DIMMs), paper trays, and printer languages.
1. Press the Home button
.
2. Open the following menus:
●
Administration
●
Reports
●
Configuration/Status Pages
3. Press the Down arrow
to highlight the Configuration Page item, and then press the OK button.
4. Press the Up arrow
to highlight the Print item, and then press the OK button.
The message Submitted to Queue displays on the control panel until the product finishes printing the
configuration page. The product returns to the Ready state after printing the configuration page.
NOTE: If the product is configured with EIO cards (for example, an HP Jetdirect Print Server) or an optional
hard-disk drive, additional pages will print that provide information about those devices.
ENWW Tools for troubleshooting 339