Recommended action
Print the job by using a product driver for a different print language, or add the requested language to the
product (if possible). To see a list of available personalities, print a configuration page.
Cleaning do not grab paper
Description
The product is performing an automatic cleaning cycle. Printing will continue after the cleaning is complete.
Recommended action
No action is necessary.
Cleaning...
Description
The product is performing an automatic cleaning cycle. Printing will continue after the cleaning is complete.
Recommended action
No action is necessary.
Clearing event log
Description
This message is displayed while the event log is cleared. The product exits the menus when the event log has
been cleared.
Recommended action
No action is necessary.
Clearing paper path
Description
The product is attempting to eject jammed paper.
Recommended action
Check progress at the bottom of the display.
Close front door
Description
The front door of the product is open.
Recommended action
1. Close the door.
2. Use the manual sensor test to verify that the front-door switch is properly functioning. If the switch
fails the test, replace the switch.
466 Chapter 3 Solve problems ENWW
To Next Page
Loading...