HP M750 series

Replace <supply>
Description
This alert displays only if the product is configured to stop when a supply reaches the very low threshold. The
product indicates when a supply level is at its estimated end of life. The actual life remaining might be
different than estimated.
The supply does not need to be replaced now unless the print quality is no longer acceptable.
HP recommends that the customer have a replacement supply available to install when print quality is no
longer acceptable.
The product can be configured to stop when the supply level is very low. The supply might still be able to
produce acceptable print quality.
NOTE: When an HP supply has reached its approximated end of life, the HP Premium Protection Warranty
on that supply ends.
●
10.00.70 (event code)
Black print cartridge
●
10.01.70 (event code)
Cyan print cartridge
●
10.02.70 (event code)
Magenta print cartridge
●
10.03.70 (event code)
Yellow print cartridge
●
10.23.70 (event code)
Fuser Kit
●
10.31.70 (event code)
Toner collection unit
●
10.22.70 (event code)
Transfer kit
Recommended action
Replace the specified supply.
Or, configure the product to continue printing by using the Manage Supplies menu.
Replace supplies
Description
This alert displays only if the product is configured to stop when a supplies reach the very low threshold. Two
or more supplies have reached the estimated end of life. The product indicates when a supply level is at its
estimated end of life. The actual life remaining might be different than estimated.
480 Chapter 3 Solve problems ENWW