Send a scanned document to a USB flash drive
The product can scan a file and save it in a folder on a USB flash drive.
NOTE: You might be required to sign in to the product to use this feature.
Before you can use this feature, you must enable the USB port. Use the following procedure to enable the
port from the product control-panel menus:
1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. Open the following menus:
●
General Settings
●
Enable Retrieve from USB
3. Select the Enable option, and then touch the Save button.
Scan and save the document
1. Place the document face-down on the
scanner glass, or place it face-up in the
document feeder and adjust the paper
guides to fit the size of the document.
ENWW
Send a scanned document to a USB flash drive
19
To Next Page
Loading...