Creating DVD Movies 145
Make Movie
This is the final step of your DVD project. You select
a format, the type of TV system, and volume name.
1 If your project is already open, click the
Make Movie button and skip to step 5.
2 Click Start, choose All Programs, Video,
InterVideo WinDVD Creator, and then
click InterVideo WinDVD Creator again.
3 Select the Open existing project button
and select your project.
4 Click the Make Movie button.
5 Insert a blank recordable DVD or CD into
your drive.
6 Choose one from each of the following
sections (order of selections may differ).
7 Click the right arrow and then click Start.
8 Click OK.
Select Function
Format Select one of the formats to
record your project.
TV System Select between NTSC and
PAL for your TV system.
The NTSC format is used
in North America, and the
PAL format is used in
European and Asian
countries/regions.
Volume
Name
of Disc
Enter a Volume name for
your disc (optional).
Select
Device
Select the device that
contains the blank
recordable DVD or CD.
Burning
Speed
Select the speed to use
when recording your
project.
Burn to
Disc
Select where you would
like the file to be recorded:
Burn to Disc: Use this
to burn directly to a DVD
or CD.
Write content to hard
disk for later burning:
Use this to create the file
on your hard disk drive.
To Next Page
Loading...
