16 HP Media Center PC Software Guide
To begin using your remote control
1 Point the remote control at the remote sensor.
The remote sensor should be located near
your monitor or in a convenient place. Make
sure there is nothing blocking the pathway
between your remote control and the remote
sensor.
2 To start Media Center and to open the
Media Center Start menu, press the
Start button .
3 If this is your first time using the remote
control, the Media Center setup wizard
opens. Follow the onscreen instructions to
complete the remote control setup steps.
Or
If you have completed the Media Center
setup wizard, the Media Center Start menu
opens. Use the arrow keys on the remote
control to select an item, and then press OK
to select an option and to begin using
Media Center.
To Next Page
Loading...
