HP Mini 5102 User Manual

Buttons
Component Description
(1) QuickWeb button
●
When the computer is off, press the button to open
HP QuickWeb.
●
When the computer is on, press the button to open
the default Web browser.
(2) QuickLook button
●
When the computer is off, press the button to open
HP QuickLook.
●
When the computer is on, press the button to open
Software Setup.
NOTE: If Software Setup is not available, the default
Web browser opens.
(3) Power button
●
When the computer is off, press the button to turn
on the computer.
●
When the computer is on, press the button to shut
down the computer.
●
When the computer is in the Sleep state, press the
button briefly to exit Sleep.
●
When the computer is in Hibernation, press the
button briefly to exit Hibernation.
If the computer has stopped responding and Windows
shutdown procedures are ineffective, press and hold the
power button for at least 5 seconds to turn off the
computer.
To learn more about your power settings, select Start >
Control Panel > System and Security > Power
Options.
Top components 7

HP Mini 5102 Specifications

General

Processor	Intel Atom N450 / N470
Graphics	Intel GMA 3150
Display	10.1-inch, 1024x600 or 1366x768 resolution
Memory	Up to 2 GB DDR2 SDRAM
Storage	160 GB / 250 GB / 320 GB HDD or 80 GB SSD
Operating System	Windows 7 Starter
Battery	3-cell or 6-cell lithium-ion
Wireless	Bluetooth 2.1+EDR
Ports	3 USB 2.0, VGA, Ethernet, Headphone/Microphone combo jack
Webcam	Integrated Webcam