To replace the front fan holder assembly,
1. Connect the system fan cable to system board connector (Figure 3-34,1)
2. Installing system fan to chassis. (Figure 3-34,2)
Figure 3-34 Replace the front fan/ PCI card holder assembly
Figure 3-35 Installing the system fan
3. Reinstall the air baffle.
4. Reinstall the access panel and tighten the thumbscrews.
5. Return the server to the upright position.
6. Connect the power cables to the power supplies.
End of procedure.
Removal and replacement procedures 56
To Next Page
Loading...
