2 Installation
When mounting the AP on a wall or ceiling, ensure that the surface to which you attach the AP
and the fasteners you use can support at least 0.9 kg (2 pounds). Allow extra weight for cables.
Powering the AP
The AP can be powered by:
• A 10/100 or 10/100/1000 PoE-enabled switch. PoE-enabled switches are available from
HP.
• An HP 1-Port Power Injector (J9407A).
• An HP AP Power Supply (J9405A).
Powering the AP 9
To Next Page
Loading...
