MSM3xx / MSM4xx Access Points 5.3.5 Release Notes 10 HP ProCurve Networking
Release 5.3.2
Fixes
The following issues have been fixed since the previous release:
ID Description
39248 802.1X WPA2 clients that do not have a valid value for the Descriptor Type field are not
able to connect.
39292 (Only MSM410 and MSM422 (MAP-625).) In environments with substantial wireless
interference, some client stations may experience low throughput when connected via
802.11n.
40332 Spanning Tree Protocol is not supported on the MSM317 switch ports.
40434 (Only MSM317.) Wireless throughput on higher channels may be reduced when the
transmission power is set to maximum.
41519 An AP with a valid sensor license will not report it to the controller, causing the controller
to wrongly flag the AP as having a "License violation."
42595 When both L3 mobility and WPA2 opportunistic key caching are enabled on a VSC, and
client stations frequently roam between several APs, the APs may unexpectedly restart.
To Next Page
Loading...
Need help?
General
