HP mt45 User Manual

5. Remove the ve Phillips M2.0 × 3.0 screws that secure the system board to the computer.
6. Lift the right side of the system board up at an angle (1).
7. Pull the system board up and toward the right to release the connectors from the left side of the
computer, and then remove the system board (2).
IMPORTANT: Do not remove memory shielding from the system board when replacing memory or the
system board.
Reverse this procedure to install the system board.
62 Chapter 6 Removal and replacement procedures for authorized service provider parts

HP mt45 Specifications

General

Battery	HP Long Life 3-cell, 50 Wh Li-ion
Processor	AMD Ryzen 3 PRO 3300U
Graphics	AMD Radeon Vega Graphics
Display	14" diagonal FHD IPS anti-glare WLED-backlit (1920 x 1080)
Memory	8 GB DDR4-2400 SDRAM
Ports	1 USB 3.1 Type-C, 2 USB 3.1 Gen 1, 1 HDMI 2.0, 1 RJ-45, 1 headphone/microphone combo
Wireless	Intel Dual Band Wireless-AC 9260 802.11a/b/g/n/ac (2x2) Wi-Fi and Bluetooth 5 Combo
Operating System	Windows 10 IoT Enterprise