HP N1200 - StorageWorks Network Storage Router - Serial Configuration

N1200-320 4Gb Network Storage Router user and service guide 35
Serial configuration
The Serial screen is used to change the baud rate for the serial port (see Figure 15).
NOTE: If the Autobaud feature is being used, it may not be necessary to set the baud rate.
Figure 15 Serial screen
The current baud-rate setting is displayed.
Baud rate choices are:
• 9600
• 19200
• 38400
• 57600
• 115200
NOTE: HP recommends setting the baud rate to 115200.