N1200-320 4Gb Network Storage Router user and service guide 61
Baud rate configuration
This menu changes the baud rate used on the serial port. Select 1 through 5 for the appropriate baud rate
setting. If you are using the Autobaud feature, it may not be necessary to set a baud rate. See ”Autobaud
feature” on page 21 for more information on using the Autobaud feature. The default setting for the baud
rate is 115200.
Figure 39 Baud rate configuration menu
NOTE: The asterisk (*) symbol indicates the current setting for the baud rate.
Baud Rate Configuration Menu
X.XX.XX XXXXXX XXXXXXXXXXXXXXXX
07/7/2005 08:56:22
1) 9600 2) 19200
3) 38400 4) 57600
5) * 115200
X) Return to previous menu
To Next Page
Loading...
