Need help?Do you have a question about the HP NC523SFP and is the answer not in the manual?
General| Bus Type | PCI Express 2.0 x8 |
|---|---|
| Data Transfer Rate | 10 Gbps |
| Form Factor | Plug-in card |
| Product Type | Network adapter |
| Data Link Protocol | 10 Gigabit Ethernet |
| Connector Type | SFP+ |
| Compatibility | HP ProLiant Servers |
| Operating System Support | Windows, Linux |
| Ports | 2 x 10Gb Ethernet |
Provides essential safety information including warnings, cautions, and notes for safe equipment handling and operation.
Instructions on how to download drivers, firmware, and documentation from the HP website.
Provides contact details for HP authorized resellers and technical support.
Provides a general description of the HP NC523SFP 10Gb 2-port Ethernet Server Adapter and its features.
Explains the function of the Link (L) and Activity (A) LED indicators on the adapter ports.
Describes installation precautions, adapter installation steps, and network cable connection procedures.
Details precautions to prevent damage from static electricity during system setup and handling.
Step-by-step guide for installing the adapter into a PCI Express slot in a server.
Instructions for replacing the standard bracket with a low profile bracket for specific server types.
Steps for connecting network cables (DAC or fiber optic) to the SFP+ ports of the adapter.
Details the specifications for different cable types supported by the adapter, including length limits.
Lists general technical specifications such as controller, data rate, PCI bus, connectors, and dimensions.
Outlines compliance standards related to IEEE and safety regulations for the adapter.
Lists other compliance standards including PCle, RoHS, IPv4/IPv6, CE, WHQL, and SFP+ module standards.
Specifies operating temperature and humidity ranges for the adapter.
Specifies non-operating temperature and humidity ranges for the adapter.
Details the typical and maximum power consumption of the adapter.
Explains the purpose and use of regulatory model numbers for product identification and compliance.
FCC compliance statement for Class A digital device, outlining potential interference in commercial environments.
Details CE marking compliance with EU Directives and harmonized European standards.
Statement of compliance for Class A digital apparatus with Canadian Interference-Causing Equipment Regulations.
Notice for Class A digital apparatus in Korean, regarding electromagnetic wave compatibility.
Notice for Class A information technology equipment in Japanese, regarding potential radio interference.
Guidance on the proper disposal and recycling of waste equipment according to EU regulations.
Precautions to prevent damage from static electricity when handling sensitive components.
Describes various methods for proper grounding to protect against static discharge during installation.
To Next Page
