HP NC552SFP - User Manual

HP NC552SFP 10Gb 2-port Ethernet Server
Adapter
User Guide
Abstract
This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the
servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels.
Part Number: 656159-003
September 2013
Edition: 3

HP NC552SFP Specifications

General

Ports	2
Data Rate	10Gbps per port
Form Factor	Plug-in card
Product Name	HP NC552SFP 10Gb 2-port Ethernet Server Adapter
Interface	PCI Express 2.0 x8
Compatibility	ProLiant servers
Operating Systems Supported	Linux, VMware

Summary

Technician Notes and Safety Information

Warnings, Cautions, and Notes

Critical safety information including warnings, cautions, and general notes for safe operation.

Adapter Installation Procedures

Installation Overview and Precautions

Preventing Electrostatic Discharge (ESD)

Detailed guidelines to prevent damage to sensitive components from static electricity.

Server Installation Steps

Installing the Adapter in a Server

Procedure for physically installing the adapter into a server's PCI Express slot and securing it.

Low Profile Bracket Installation

Connecting the Network Cable

SFP+ Module or DAC Cable Connection

Steps for connecting SFP+ optical modules or DAC cables to the adapter's ports.

Specifications and Cable Compatibility

Cable Specifications and Grades

Supported Cables for HPN5900

Supported Cables for HPN6600

General and Environmental Specifications

General Specifications

Regulatory Compliance Notices

Electrostatic Discharge (ESD) Management

Preventing ESD Damage

Precautions to prevent system damage from static electricity discharge.

Grounding Methods for ESD Prevention

Various methods like wrist straps and heel straps to ensure proper grounding.