HP Ethernet 1Gb 4-port 366M User Manual

The HP 366M is a HP BladeSystem c-Class network adapter providing four Gigabit Ethernet ports on a single card saving valuable
server mezzanine slots for other purposes. The x4 PCI Express 366M is supported on ProLiant c-Class servers in all mezzanine slots.
For Gen8 ProLiant c-Class servers, the 366M is the first quad-port adapter option for c-Class with latest Intel® Ethernet I350 controller
With the 366M, up to 96 Gigabit Ethernet ports per c7000 enclosure and 48 per c3000 enclosure are possible.
The four ports provide the highest port density available for BladeSystem servers in a single adapter. The 366M is ideal for
virtualization, security, server consolidation, network segmentation, and other server applications requiring maximum throughput and
port density in a 1 GbE infrastructure. The total aggregate throughput of 8Gbps full duplex also meets the needs for customers
desiring high bandwidth but are not yet ready to move to 10 Gigabit Ethernet.
HP Ethernet 1Gb 4-port 366M Adapter
Models
HP Ethernet 1Gb 4-port 366M Adapter 615729-B21
Kit contents HP Ethernet 1Gb 4-port 366M Adapter
Quick install card
Product warranty statement
Drivers, user guide, and utilities via http://www.hp.com
QuickSpecs
HP Ethernet 1Gb 4-port 366M Adapter
Overview
DA - 14335 North America — Version 8 — April 18, 2014 Page 1

HP Ethernet 1Gb 4-port 366M Specifications

General

Ports	4
Speed	1Gb
Form Factor	Low profile
Network Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Product Type	Network Adapter
Data Transfer Rate	1 Gbps per port
Ports Type	RJ-45
Interface	PCIe 2.1
Interface Type	PCI Express
Compatibility	HP ProLiant servers