HP NC552SFP - Specifications and Cable Compatibility; Cable Specifications and Grades; Supported Cables for HPN5900; Supported Cables for HPN6600

Specifications 10
Specifications
Cable specifications
SFP+
module type
Cable
Connector
Type
Wavelength
(nm), type of
cable
Core Size
(microns,
µm)
Cable grade Minimum
modal
bandwidth
(MHz-km)
Maximum
Cable Length
(meters)
10GBASE-SR
(short range)
Optical
Module
LC 850,
Multi-Mode
Fiber (MMF)
62.5
62.5
50
50
50
(“FDDI”)
OM1
OM2
OM3
160
200
400
500
2000
26
33
66
82
300
10GBASE-CR
with Direct
Attached
Copper
(DAC) cable
SFP+ N/A, Twin
Axial Copper
24 to 28
AWG,
depending on
length and
manufacturer
N/A N/A 5
Supported cables for HPN5900
The following cables can connect the adapter to an HPN5900:
• HP X240 10G SFP+ to SFP+ 0.65m DAC cable JD095C
• HP X240 10G SFP+ to SFP+ 1.2m DAC cable JD096C
• HP X240 10G SFP+ to SFP+ 3m DAC cable JD097C
• HP X240 10G SFP+ to SFP+ 5m DAC cable JG081C
• HP X240 QSFP+ 4x10G SFP+ 1m DAC cable JG329A
• HP X240 QSFP+ 4x10G SFP+ 3m DAC Cable JG330A
Supported cables for HPN6600
The following cables can connect the adapter to an HPN6600:
• HP X242 10G SFP+ to SFP+ 1m DAC cable J9281B
• HP X242 10G SFP+ to SFP+ 15m DAC cable J9287B
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP Product Bulletin website (http://www.hp.com/go/productbulletin).