Upgrading a memory module in the primary memory
module slot
To upgrade a memory module in the primary memory module slot:
1. Save your work.
2. Shut down the computer. (If you are not sure whether the computer is off or in hibernation, turn the
computer on by pressing the power button. Then shut down the computer through the operating
system.)
3. Disconnect all external devices connected to the computer.
4. Unplug the power cord from the AC outlet.
5. Turn the computer upside down on a flat surface.
6. Remove the battery from the computer.
7. Remove the 3 keyboard screws.
8. Turn the computer over and open it.
6 Chapter 1 Adding or replacing memory modules ENWW
To Next Page
Loading...
