2 – Index
I
included parts … 2-1
installation
connecting the switch to a power source … 2-11
horizontal surface mounting … 2-9
location considerations … 2-5
network cable requirements … 2-5
precautions … 2-3
site preparation … 2-5
wall mounting … 2-8
L
LEDs
behavior during self test … 2-8
descriptions of … 1-3
error indications … 3-3
Fault
behavior during self test … 2-8
location on switch … 1-2
on switch … 1-3
Power … 1-3
behavior during self test … 2-8
location for the switch, considerations … 2-5
M
MDI-X to MDI network cable … A-6, A-8
MDI-X to MDI-X network cable … A-7
mini-GBICs
slot, location on switch … 1-2
mounting the switch
in a rack or cabinet
precautions … 2-3
on a horizontal surface … 2-9
on a wall … 2-8
precautions … 2-8
N
network cables
HP Auto-MDIX feature … A-4
required types … 2-5
twisted-pair connector pin-outs … A-4
twisted-pair, wiring rules … A-4
network devices
connecting to the switch … 2-12
network ports
connecting to … 2-12
location on switch … 1-3
types of … 1-3
non-standard network cables, effects … 3-2
P
parts, included with the switch … 2-1
physical specifications, switch … A-1
pin-outs
twisted-pair cables … A-4
port LEDs
normal operation … 2-8
ports
10/100Base-TX, location on switch … 1-4
connecting to … 2-12
HP Auto-MDIX feature … A-4
network connections … 2-12
power connector … 1-4
Power LED … 1-3
behavior during self test … 2-8
behaviors … 1-3
location on switch … 1-2
power source
connecting the switch to … 2-11
precautions
mounting the switch … 2-3
power requirements … 2-3
preparing the installation site … 2-5
R
rack
mounting precautions … 2-3
Reset button
location on switch … 1-2
resetting the switch
troubleshooting procedure … 3-5
S
safety and regulatory statements … B-1
safety specifications … A-2
self test
Fault LED behavior … 2-8
LED behavior during … 2-8
Power LED behavior … 2-8
To Next Page
Loading...
