During the warranty period the cartridge is covered as long as the HP ink is not depleted and the end of
warranty date has not been reached. The end of warranty date, in YYYY/MM format, may be found on the
cartridge as indicated:
For a copy of the HP Limited Warranty Statement for the printer, see the printed documentation that came
with the product.
Tips for working with cartridges
Use the following tips to work with cartridges:
●
To protect the cartridges from drying out, always turn the printer o using the On button, and wait until
the On button light goes out.
●
Do not open or untape cartridges until you are ready to install them. Leaving tape on the cartridges
reduces ink evaporation.
●
Insert the cartridges into the correct slots. Match the color and icon of each cartridge to the color and
icon for each slot. Make sure the cartridges snap into place.
●
Alignment is automatic after new cartridge installation. Alignment can also help later, in cases of blurred
or jagged lines. See Fix print quality issues on page 73 for more information.
●
When the Estimated Ink Levels screen shows one or both cartridges in a low state, consider getting
replacement cartridges to avoid possible printing delays. You do not need to replace the cartridges until
print quality becomes unacceptable. See Replace the cartridges on page 52 for more information.
●
If you remove a cartridge from the printer for any reason, try to replace it again as soon as possible.
Outside of the printer, if unprotected, cartridges begin to dry out.
ENWW Tips for working with cartridges 55
To Next Page
Loading...