Use SETUP cartridges
When you first setup the printer, you must install the cartridges that shipped in the box with the
printer. These cartridges are labeled SETUP, and they calibrate your printer before the first print job.
Failure to install the SETUP cartridges during the initial product setup causes an error. If you installed
a set of regular cartridges, remove them and install the SETUP cartridges to complete printer setup.
After printer setup is complete, the printer can use regular cartridges.
if you still receive error messages and the printer cannot complete ink system initialization, contact
HP support. For more information, see
HP support on page 97.
Click here to go online for more information .
ENWW Use SETUP cartridges 277
To Next Page
Loading...
