Tour the Product hp confidential 21
front view
front view
Front of the Printer
The components located at the front of the all-in-one are:
1.
Print Carriage Access Door Handle:
The print-carriage access door handle
is lifted to open the print-carriage access door.
2.
Print Carriage Access Door:
The supplies area consisting of printheads and
ink cartridges is located under the print-carriage access door. Therefore,
the print-carriage access door is the gateway to access the printing
supplies area.
3.
Output Tray:
The output tray is the location for collecting the output. The
output tray supports all types of media, such as paper and transparency.
The output tray can hold up to 100 sheets of plain paper. You can change
the settings in the Control Panel and the Embedded Web Server (EWS) to
pause the printing process when the output tray is full. There is no sensor
that alerts when the tray is empty. The tray is assumed empty after
counting/printing 100 pages. The printer pauses waiting for human
intervention. This is called unattended printing.
4.
Tray 1:
Tray 1 is used for loading media, such as paper, envelopes, cards,
transparencies, and photo paper in the HP Officejet 9100 all-in-one series.
Tray 1 can hold up to a maximum of 150 sheets of paper and 30
transparencies.
5.
Paper Level Indicator:
The Paper Level Indicator is an indicator in tray 1
that shows the amount of paper left in the tray.
6.
Memory card slot:
The HP Officejet 9100 series all-in-one comes with a
memory card reader that can read several types of memory cards
including digital camera memory cards. The all-in-one features four slots,
one slot for each of the types of memory cards listed below.
• CompactFlash I and II
• Secure Digital
• Memory Stick
• SmartMedia
• Multimedia Card
• Secure Digital Card
To Next Page
Loading...