ENWW Configuring print options 119
Configuring print options
This section contains information about the following topics.
z Setting the print defaults
Setting the print defaults
You can set the following defaults for print jobs in the embedded Web server:
z Tray that will be used and the paper size and paper type for each tray
z Automatic sensing of media type (on or off)
z Print speed
You can set the following defaults for print jobs from the control panel:
z Number of copies that will print
z Paper size, paper type, paper quality, and paper-size overrides
z Duplexing (on or off)
z Tray that will be used and the paper type and paper size for each tray
z Automatic sensing of media type (on or off)
z PCL font characteristics
z Printing of PostScript errors (on or off)
z Unattended printing (on or off)
z Personality
Note Settings in a software program (for example, media size) always take precedence over settings
in the printer driver or the control panel.
Settings in a printer driver always take precedence over settings in the control panel.
To set the print defaults
z Embedded Web server (network connection)
Open the embedded Web server, click the Settings tab, and then click Paper Handling in
the left pane.
z Control panel
Press M
ENU and use the options on the PRINTER menu.
To Next Page
Loading...