ENWW Setup menus 245
NETWORK & I/O menu
Menu item Description
I/O timeout Sets the length of time (from 5 to 300 seconds) that the all-in-one waits for
remaining data for a print job. If that time is exceeded, the all-in-one prints the
print job.
Enhanced I/O Opens the ENHANCED I/O submenu, which is used to configure the following
protocol options:
z TCP/IP (Transmission Control Protocol/Internet Protocol)
z IPX/SPX (Internetwork Packet Exchange/Small Peripheral Controller)
z DLC/LLC (Data Link Control/Logical Link Control)
z Atalk (AppleTalk)
See the HP Jetdirect Administrator’s Guide on Starter CD 1 for more information
about these options.
Show IP addr Shows the IP address for the all-in-one on the control-panel display.
Configure LDAP Opens the CONFIGURE LDAP submenu, which is used to configure the
following options for the LDAP feature:
z LDAP server name
z Account name and password
z Directory service server port number
z Search criteria (maximum search time in seconds, maximum number of
matches to return, search root of the directory server, and search method)
To Next Page
Loading...