ENWW Installing the keyboard 27
Installing the keyboard
The keyboard comes with the HP Officejet 9130 all-in-one. It is an optional accessory for the
HP Officejet 9110 all-in-one and HP Officejet 9120 all-in-one. See Ordering HP accessories
and supplies for information about ordering accessories.
Note When sending scans to a network folder or as e-mail attachments from an all-in-one that is
connected to a network, you must type any required information (such as user information or
e-mail addresses) using the all-in-one keyboard.
To install the keyboard
1 Press (POWER) to turn off the all-in-one.
2 Unplug the power cord.
3 Open the print-carriage access door by pulling up on the door handle.
4 Remove the keyboard tray lock from the underside of the print-carriage access door.
To Next Page
Loading...