HP Officejet 9100 - Changing settings for the all-in-one

ENWW Using the all-in-one modes 31
3
Using the all-in-one
This section contains the following basic information about using the all-in-one.
z Using the all-in-one modes
z Changing settings for the all-in-one
z Canceling jobs from the control panel
z Using the HP photo and imaging software
z Typing numbers and text on the control-panel keypad
z Loading the originals
z Loading the print media
z Choosing the print media
z Using special media
z Printing on both sides of the page
z Setting up speed-dial entries
Using the all-in-one modes
The five modes for the all-in-one correspond to the five mode buttons on the control panel.
Viewing status and
obtaining help
The control-panel display continually shows messages that provide
information about the status of the all-in-one.
Press (help) anytime that you want additional information about
status.
If the Attention light blinks, press (help) for a message that explains
the problem.
See Control-panel messages for a list and explanation of messages.
Copy Scan Photo E-mail
Mode buttons
Control-panel
display
Help button
Attention light
Fax