Speaker assembly
Table 6-5 Speaker assembly description and part number
Description Spare part number
Speaker assembly (includes cushion) L57375-001
Before removing the speaker assembly, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 29).
2. Remove the bottom cover (see Bottom cover on page 30).
3. Remove the battery (see Battery on page 38).
Remove the speakers:
1. Disconnect the speaker cable from the system board (1).
2. Remove the two Phillips M2.0 × 2.0 screws (2) that secure each speaker to the computer.
3. Remove cable that runs between the speakers from the clips along the bottom of the computer (3).
4. Remove the speaker assembly from the computer (4).
Reverse this procedure to install the speaker assembly.
42 Chapter 6 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
