EL-MF877-00 Page 5
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Figure13 Remove the access right side cover R by 2 PCS
screws
Figure14 Release 5pcs screws from TOP base both side
and take off it
Figure15 Unplug all cables connector from the function
board PCA
Figure16 Release 7pcs screws from top base module and
remove function board PCBA
Figure17 Open the HDD Door and push HDD locker to
release high end HDD cage module
Figure18 Pull up the HDD cage and release 4 screws to
remove HDD
To Next Page
Loading...
