作 业 指 导 书
Document No. : Crescent & Tenjin 拆机SOP 站 別:
作 业 名 称 : Ver. : 1.00 编辑日期:2019/4/3
治具清单(治具规格) 数量 治具清单(治具规格) 数量
步骤:
注意事项︰如有异常,请立即通知领班或助理。
发行部门:制表: 黃雅君
工業工程課
Disassemble BASE
2(1/1)
1. Separate base with cable management rod
步骤: Inserted the cable bar into the gap
between TOP and BASE intermediate area, and
then slid cable bar to separate the TOP from
the BASE.
塑胶拆机棒 1