5–10 Maintenance and Service Guide
Removal and Replacement Procedures
7. Remove the six Phillips PM3.0×3.0 screws 1 that secure
the hard drive bracket to the hard drive.
8. Lift the bracket 2 straight up to remove if from the
hard drive.
Removing the Hard Drive Bracket
Reverse the above procedure to install and reassemble the
hard drive.
http://mycomp.su - Maintenance and Service Guide,Motherboard Schematics for Laptop/notebook
Ремонт ноутбуков.Запчасти и комплектующие для ноутбука.
Схемы,сервис мануалы,инструкции по разборке ноутбука.
To Next Page
Loading...
