Optical drive
NOTE: The optical drive spare part kit includes an optical drive bezel and bracket.
Description Spare part number
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti DL Drive 616978-001
Blu-ray ROM DVD±R/RW SuperMulti DL Drive 605416-001
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe 605417-001
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 46).
5. Remove the primary hard drive cover (see
Primary hard drive cover on page 47).
Remove the optical drive:
1. Position the computer with the front toward you.
2. Remove the Phillips PM2.5×3.0 screw (1) that secures the optical drive to the computer.
58 Chapter 4 Removal and replacement procedures ENWW
To Next Page
Loading...
Need help?
General