17.
Remove the display hinge assembly (3) by lifting it straight up. The Display Hinge Kit is available
using spare part number 605334-001. The Display Screw Kit is available using spare part
number 611251-001.
The left and right sides of the display hinge assembly are secured using four PM 2.5×4.0 screws
(1) to a bracket (2) as shown in the following image.
NOTE: Steps 18 through 29 provide component removal information for computer models
equipped with a standard display assembly. See steps 4 through 17 for component removal
information for computer models equipped with a flush glass display assembly.
ENWW
Component replacement procedures
73
To Next Page
Loading...
Need help?
General