e. Remove the display bezel (5).
The display bezel is available using spare part number L72717-001.
7. If it is necessary to remove the display panel:
a. Use tweezers to pull and roll the tape that routes behind both the left and right sides of the display
panel (1).
b. As you pull the tape out from behind the panel, roll the tape around the tweezers (2).
NOTE: You have to pull on the tape multiple times before it is completely removed. To avoid
tearing the tape, pull the tape evenly and carefully. Rolling the tape around the tweezers helps
avoid tearing the tape.
Component replacement procedures 51
To Next Page
Loading...
