Speakers
Description Spare part number
Speakers (includes left and right speakers and cable) 833149-001
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn the 
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet and then 
unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 34).
5. Remove the optical drive (see Optical drive on page 35).
6. Remove the bottom cover (see Bottom cover on page 38).
7. Remove the system board (see System board on page 56).
To remove the speakers:
1. Remove the speaker wire from the clips between the speakers (1).
2. Remove the display cable from the channel at the top of the left speaker (2).
3. Remove the speakers from the computer (3).
Reverse this procedure to install the speakers.
60 Chapter 6   Removal and replacement procedures for Authorized Service Provider parts