HP Pavilion Gaming - Display Assembly, Non-Touch

Display assembly, non-touch
Description Spare part number
Raw display panel (BrightView, HD, at) 833129-001
Raw display panel (AntiGlare, FHD, slim) 839853-001
Raw display panel (AntiGlare, FHD, UWVA, non-touch) 809999-001
Raw display panel (TOP (Touch On Panel)) 833130-001
Antennas (include Mylar screw covers) 833120-001
Display bezel for use in models with a standard webcam 833126-001
Display bezel for use in models with a 3D camera 840477-001
Display cable for use in HD, SVA displays (includes Mylar screw covers) 833133-001
Display cable for use in FHD, SVA displays with a 3D camera (includes Mylar screw covers) 840454-001
For use in TOP (Touch On Panel) displays 833134-001
Display enclosure for use in black models TOP (touch on panel) models (includes Mylar screw covers) 833122-001
Display enclosure for use in white models (includes Mylar screw covers) 840290-001
Display enclosure for use in silver models (includes Mylar screw covers) 841942-001
Display enclosure for use in black models (includes Mylar screw covers) 843213-001
Hinges (left and right) (include Mylar screw covers) 809030-001
Standard camera module 833127-001
3D camera module 833128-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 34).
5. Remove the optical drive (see Optical drive on page 35).
6. Remove the bottom cover (see Bottom cover on page 38).
7. Remove the system board (see System board on page 56).
To remove the display assembly:
1. Position the computer on its side, partially open.
2. Remove the two Phillips PM2.5×5.0 screws (1) that secure the display assembly to the computer.
3. Open the display to rotate the hinges upward to an angle (2).
66 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts