4. Remove the two Phillips 2.5×5.0 screws (2) that secure the display bezel to the display enclosure.
5.
Position the computer with the front toward you.
6.
Remove the following screw covers and logo labels:
(1) Two rubber screw covers on the display bezel top edge corners
(2) Two rubber screw covers on the display bezel top edge
(3) Four rubber screw covers on the display bezel left and right sides
(4) Speaker logo label on the display bezel lower left edge
(5) Computer model logo label on the display bezel lower right edge
38 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
