Desription Spare part number
X7900 2.8-GHz processor, 4-MB L2 cache 453908-001
X7800 2.6-GHz processor, 4-MB L2 cache 455738-001 and
452327-001
Intel Core 2 Duo processors (800-MHz FSB, 35-W):
T9500 2.6-GHz processor, 6-MB L2 cache
459609-001
T9300 2.5-Ghz processor, 6-MB L2 cache 459608-001
T8300 2.4-GHz processor, 3-MB L2 cache 459607-001
T8100 2.1-GHz processor, 3-MB L2 cache 459606-001
T7700 2.4-GHz processor, 4-MB L2 cache 448148-001
T7500 2.2-GHz processor, 4-MB L2 cache 448147-001
T7300 2.0-GHz processor, 4-MB L2 cache 448146-001
T7250 2.0-GHz processor, 4-MB L2 cache 456965-001
T7100 1.8-GHz processor, 4-MB L2 cache 448149-001
Before removing the processor, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 36).
5.
Remove the following components:
a.
Hard drive (see
Hard drive on page 42)
b.
Optical drive (see
Optical drive on page 49)
c.
Keyboard (see
Keyboard on page 50)
d.
Hinge cover (see
Hinge cover on page 52)
e.
Rear cover (see
Rear cover on page 53)
f.
Top cover (see
Top cover on page 55)
g.
Subwoofer (see
Subwoofer on page 67)
h.
System board (see
System board on page 70)
i.
Processor heat sink (see
Processor heat sink on page 75)
Remove the processor:
1. Turn the processor locking screw (1) one-half turn counterclockwise until you hear a click.
78 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
