To Next Page

To Previous Page

Optical drive

Description Spare part number

DVD±RW Double-Layer with SuperMulti Drive (includes optical drive bezel and optical drive

bracket)

686916-001

Before removing the optical drive, follow these steps:

1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by unplugging the power cord from the computer.

3. Disconnect all external devices from the computer.

4. Remove the battery (see

Battery on page 48).

5. Remove the service cover (see

Hard drive on page 49).

Remove the optical drive:

1. Remove the Phillips PM2.5×3.5 screw (1) that secures the optical drive the computer.

2. Use a flat-blade screw driver or similar tool to press on the optical drive bracket tab (2) to release

the optical drive.

Component replacement procedures

Questions and Answers:

Need help?

Do you have a question about the HP Pavilion m6 and is the answer not in the manual?

HP Pavilion m6 Specifications

General

Processor	Intel Core i7
RAM	Up to 8GB DDR3
Storage	Up to 1TB HDD or SSD options
Display	15.6-inch HD or Full HD
Graphics	Intel HD Graphics 4000, AMD Radeon HD 7670M
Operating System	Windows 8
Battery	6-cell Lithium-Ion battery
Wireless	802.11b/g/n, Bluetooth
Audio	Beats Audio
Webcam	HD webcam
Ports	USB 3.0, USB 2.0, HDMI, VGA, Ethernet, headphone/microphone combo jack, multi-format card reader