HP PB360T - Inserting the Battery; Inserting an SD;SDHC Memory Card; Charging the Battery

4
Inserting an SD/SDHC Memory Card
Open the battery compartment 1.
at the bottom of the camera.
D
ISP
DISP
Insert the SD/SDHC card into the memory 2.
card slot with the metallic part facing the
front side of the camera.
Push the SD/SDHC card into the memory 3.
slot until it clicks into place.
DIS
P
MPDL
Close the battery compartment.4.
DISP
DISP
To remove the SD/SDHC card
Open the battery compartment.1.
Gently push the card until it pops out.2.
Pull out the card carefully.3.
Charging the Battery
The battery that comes along with your
package is not charged. You need to charge
the battery before using the camera.
Insert the battery into the battery 1.
charger as shown.
Connect the power cord to the battery 2.
charger.
Plug the power cord to the main outlet.3.
The battery charging time is 2 hours.