Using Your PC Top 17
4 Thread the cables that came with your peripheral devices or camera docking
station through the cable tunnel (C). Starting from the back of the PC, thread
them to the front of the PC. Pull the cables to the center and connect them to the
peripheral or the docking station (D).
5 Connect the cables to the back of the PC or to a power outlet (E).
For a peripheral, refer to the instructions that came with your peripheral device.
For an HP camera docking station:
• Plug the USB cable into the back of the PC.
• Plug the power cord into a power outlet.
Optionally, if you want to view the camera images on a TV, plug the red and
yellow connectors (not shown) into the TV.
Refer to the instructions that came with the HP camera docking station.
D
E
C
To Next Page
Loading...
