18 EN
18
Rectangular Area Fill Graphics
Horizontal Rectangle Size (Decipoints or Dots)
Specifies the rectangular fill area width in decipoints or dots.
? * c # H -
Decipoints
# = Number of decipoints (1/720 inch)
? * c # A -
Dots
# = Number of dots (see Unit of Measure Command)
Vertical Rectangle Size (Decipoints or Dots)
Specifies the rectangular fill area height in decipoints or dots.
? * c # V -
Decipoints
# = Number of decipoints (1/720 inch)
? * c # B -
Dots
# = Number of dots (see Unit of Measure Command)
Set Pattern Reference Point
Sets pattern reference point to cursor position and will either keep pattern
fixed or rotate with print direction changes.
? * p # R
# = 0 - Rotate patterns with print direction
1 - Keep patterns fixed
Pattern (Area Fill) ID (Pattern ID)
Specifies the level of shading or type of cross-hatch to select via Fill
Rectangular Area command.
? * c # G
If Shading fill is selected: OR, if Cross-Hatch Pattern
fill is selected:
# = 1 thru 2 = 1-2% shade
3 thru 10 = 2-10% shade
11 thru 20 = 11-20% shade
21 thru 35 = 21-35% shade
36 thru 55 = 36-55% shade
56 thru 80 = 56-80% shade
81 thru 99 = 81-99% shade
100 = 100% shade
OR, if User-Defined Pattern
# = # of Pattern
Range = 0-32767
Learn.fm Page 18 Tuesday, June 22, 1999 8:17 AM
To Next Page
Loading...
