HP PCL 5 - Page 35

EN 33
33
HP-GL/2
Line and Fill Attributes Group (continued)
Screened Vectors
Selects type of area fill for vectors (lines, hatch lines, arcs, circles, edges
of polygons, rectangles, and wedges).
SV [ screen type [,option1[,option2]]][;]
Transparency Mode
Defines how the white areas of the source graphics image affect the
destination graphics image.
TR [ n][;]
n = 1 (Transparency mode=on [ default])
0 (Transparency mode=off)
User Defined Line Type
Defines a line pattern.
UL [ index[,gap1, . . . ,gapn ] ][;]
index = Line pattern number. [1–8]
gap = Percentage of pattern length for that portion (first
gap is a pen-down move).
Pen Width Unit Selection
Specifies whether pen width is defined in millimeters or as a
percentage of P1/P2 distance.
WU [ type] [;]
type = 0 (millimeters)
= 1 (percentage of P1/P2 distance)
screen type = description option 1 option 2
0 = No screening ignored ignored
1 = Shaded fill % shading ignored
2 = User defined index no. pen flag
21 = PCL Patterns pattern type ignored
22 = PCL User-defined
Patterns
pattern ID ignored
Learn.fm Page 33 Tuesday, June 22, 1999 8:17 AM