ENWW Printer-Specific Differences 2-103
Render Algorithm Command
The Render Algorithm command selects the algorithm to be used for
rendering page marking entities on a given page.
?*t#J
HP Color LaserJet 5 and 5M printers remap non-continuous tone
render algorithms (3 - 14) into continuous tone smooth (15) and
monochrome continuous tone smooth (17) algorithms.
# = 0-14 - See section 4, “Modifying Output Color” in the PCL
5 Color Technical Reference Manual for information on
algorithms 0 through 14.
15 - Continuous tone smooth 150 lpi
16 - Monochrome continuous tone detail 300 lpi
17 - Monochrome continuous tone smooth 150 lpi
18 - Continuous tone basic 100 lpi
19 - Monochrome continuous tone basic 100 lpi
Default =3
Range = 0 to 19 (invalid values are ignored; values 1, 2, 9, and
10 are ignored for device-independent color)
To Next Page
Loading...
