HP PCL 5 - Factory Default Environment - PCL Context

4-2 Print Environment ENWW
Table 4-1. Factory Default Environment — PCL Context
1
User can select default values from the printer's Operator Control Panel for these feature settings.
2
Selectable from the printer Operator Control Panel if duplex is selected.
3
Used on HP LaserJet IIISi and 4Si printers only.
4
The font characteristics are determined by the default font. The default font can be the factory default font, the user selected default font from
the Operator Control Panel, or from a font cartridge with a default font.
JOB CONTROL
Number of Copies
1
1
Duplex
1
Off (Simplex)
Binding
2
Long-edge
Registration Left=0, Top=0
Tray Lock
1
All trays unlocked
Manual Feed
1
Off
Job Separation
3
Off
Output Bin Upper (face down) bin
Units of Measure 300 Units/inch
PAGE CONTROL
Print Direction 0
Orientation
1
Portrait
Page Size
1
Letter
Paper (Media) Source Paper Source (Printer Specific Large
Source)
Media Destination 0 (Automatic Selection)
Vertical Motion Index
1
8 (6 lpi)
Horizontal Motion Index
4
12 (10 cpi)
Top Margin 1/2" (150 dots)
Text Length 60 lines
Left Margin Left logical page boundary
Right Margin Right logical page boundary
Perforation Skip On
Line Termination CR→CR, LF→LF, FF→FF