HP PCL 5 - Appendix C Symbol Set and Typeface Codes; Introduction

ENWW Symbol Set and Typeface Codes C-1
C
Symbol Set and
Typeface Codes
Introduction
The symbol set IDs in Table C-1 are used to select symbol sets using
PCL commands. Kind1 values are used to select symbol sets using
HP-GL/2 commands. The values under Kind1 are also used in the
Font Descriptor (header) symbol set field (bytes 14/15, described in
Chapter 11, Font Creation of the PCL 5 Printer Language Technical
Reference Manual). Table C-2 identifies the Typeface Family values
for the various type foundries. Table C-3 identifies all the currently
assigned typeface base values.