HP Photosmart A310 series

The Attention light is flashing red.
Cause The printer requires attention. Try the
following solutions.
Solution
● If the printer is connected to your camera, check
the camera image display for instructions.
● If the printer is connected to a computer, check
the computer monitor for instructions.
● Turn off the printer, and then turn it back on
again.
If the optional HP Photosmart Internal Battery
is not installed in the printer, unplug the printer
power cord. Wait about 30 seconds, and then
plug the power cord back in. Turn on the printer.
If the optional HP Photosmart Internal Battery is
installed in the printer, unplug the printer power
cord if it is plugged in. Open the battery
compartment cover and remove the battery.
Wait about 30 seconds, and then reinstall the
battery. Plug in the power cord. Turn on the
printer.
● For more information about what the Attention
light could indicate, see page 75.
● If the light continues to flash after trying all of the
above solutions, go to www.hp.com/support or
contact HP support.
48 HP Photosmart A310 series
English